Purchasing, mounting, and using a Ring Doorbell camera is one of the best ways to enhance the security around your house. It gives you peace of mind knowing that your home and packages are safe at all times. No matter what type of door frame you have, narrow or wide, it is possible for a Ring Doorbell camera to be installed. However, you may have to make some adjustments so the mounting is done correctly when you are using a narrow space.
A common problem some homeowners face is that there is not enough room to install Ring doorbell. The good news is that there are is a solution for most ring doorbell mounting problems. For example, Amazon.com sells kits you can purchase to solve the problem. Read on for step-by-step instructions for how to install a Ring doorbell when your trim is too narrow.
How Do You Mount a Ring Doorbell on a Narrow Door Frame?
First off, decide how you are going to mount your Ring doorbell to your door frame. Can you mount indirectly on the narrow door frame? Does it need to be mounted using an additional kit? If so, you want to be sure to purchase the correct kit, which depends on your outdoor wall and doorframe. The options include the wedge kit or the corner kit. These bracket kits provide options of where to mount the ring doorbell because they do not require hard wiring. Instead, the doorbell is powered by batteries. These kits are especially useful because they can be attached to an outer wall, a brick wall, or even outdoor posts instead of a door frame.
However, it is possible to mount a Ring doorbell using the existing doorbell. When you do this, the new door bell must be mounted in the same spot on the door frame as the existing doorbell. This is because you need to run the wires from your old doorbell to your ring doorbell. Before purchasing, make sure the door frame isn’t too narrow. It would not do you well to buy a ring doorbell too wide for a narrow door frame. Consider purchasing the Ring Doorbell Pro or Ring doorbell 2 if your space is narrow.
What you need to mount your door bell unit
Both the Ring doorbell and the Ring doorbell 2 include the following installation items for free:
- Custom screwdriver
- Properly sized drill bit
- Regular mounting brackets
- Four screws
- Four anchors
- Small level
For those who purchase the Ring doorbell 2, know that your package comes with the corner kit and wedge kit for free. Now, you are already set up for a door frame not wide enough for ring doorbell. However, all kit items can be purchased on Amazon.com. It is also important to verify your specific type of door bell. To install the door bell correctly, you must ensure you are using the kit on Amazon .com matches with your version of Ring doorbell camera.
Ring Doorbell Narrow Mount Solution with Wedge Kit
Here are the step-by-step instructions for mounting your Ring doorbell camera with the wedge kit. If you plan to install the doorbell on a narrow piece of brick, stucco, or concrete wall, use the anchors provided. The wedge kit also works well if you plan to connect your Ringdoor bell 2 or Pro to the wires of your current door bell.
1) Choose where you want your doorbell to be installed. Hold the level over the mount to ensure you install it straight. Mark a line on the wall or door frame if you need some help.
2) Use the screwdriver or drill bit that came with your doorbell to screw the screws into the holes at the bottom and top of the mount. For those who plan to install on brick or concrete, it might help to mark the holes on the wall first and use a drill to create pilot holes beforehand.
4) Secure the Ring doorbell to the wedge mount. Turn it on to see if you like the view. If you like it, you are done, so keep the camera where it is. If you need to change the angle, proceed to step 5.
5) The wedge kit comes with three spacers that give you options to adjust the angle of your view. Add one or two more wedges until you find the angle that is able to give you the best view. Keep the extra wedge or wedges in places by attaching them with the longer screws.
6) Double check you where the camera is looking. The video screen should capture as much of your space as you want. Add or remove a wedge until you are happy with your video angle. When you are satisfied, complete the installation by adding your Ring doorbell camera.
Installation of Corner Kit for a Narrow Door frame or Wall
An alternative method is to use the corner kit. The corner kit works well for the Ring doorbell 2, Pro, and most other models. Again, just ensure you use the correct mounting kit for your model of camera. This is ideal for a narrow wall or space because it changes the angle at which your camera can take video. While traditionally, many prefer their ring doorbell install on door trim, this can be problematic when it is too narrow. However, with this corner mount, you can move your installation away from the narrow door frame. Then, the mount can have its angle adjusted so your video provides the right view. This way you avoid the narrow space, but still, get all the benefits of the Ring.
1) Choose where you want your Ring doorbell 2 or Pro to be installed. Be smart and install your angle mount is on the right side of the door frame to help provide your video screen the best viewing ability. Hold the level over the mount to ensure you install it straight. To help ensure you keep holding it straight, you might draw a line on the wall, corner, or door frame.
2) Use the screwdriver or drill bit that came with your Ring doorbell to install the screws at the top and bottom holes on the corner mount. For those who plan to install on brick or concrete, it might help to mark the holes on the wall first and use a drill to create pilot holes.
4) Secure the Ring doorbell, Ring doorbell 2, or Pro to the corner mount for your narrow space. Turn it on to see if you like the video feed. If you do like it, you are done, so keep the camera where it is. If you need to adjust the angle, proceed to step 5.
5) The corner kit comes with stackable mounts that provide you the option to adjust the angle of your view. Add one or two more mounts until you find the angle that gives you the right view. Keep the extra mounting plates in places by using the right screws.
6) Double check you where the camera is looking. The video screen should capture as much of your space as you want. Add or remove a wedge until you are happy with your video angle. When you are satisfied, complete the installation by adding your Ring doorbell camera.
The corner mounting system can help any narrow space, including both left and right facing doors. The same device can be inverted so you can use the same product for right or left mounting. If you don’t know which is the best side to screw your Ring doorbell 2 or Pro, it’s a smart idea to try both sides. Even gaining just a few more inches of video surveillance could make a significant difference to keep your home safe.
What are the Bracket options for a Ring Doorbell 2 Narrow Installation?
The Ring doorbell 2 is one of the most popular Ring products to use. If you are looking for a video doorbell for a narrow door frame installation, this product is worth using. It is properly designed to withstand outdoor elements and last for years. It also comes with additional mounting kits, so you don’t need to search for related products online or at Amazon .com. If you are using your next video doorbell in a narrow space, get this product. The installation is easy and you can mount it on any wall or door frame.
Where do I buy the Best Ring doorbell Mounting Products to Help with a Narrow Doorframe?
If the Ring video you are using for a narrow door installation doesn’t come with the appropriate accessories, you can find the correct mounts on Amazon. com. Amazon .com sells all types of mounts for narrow spots. Remember that even a couple of inches can make a difference. A Ring doorbell of the wrong width may result in you not able to open your door. Your goal should be for your next doorbell to last for years, so instead of purchasing the wrong thing, look at the list below to get help finding the right Ring doorbell install mounting plate. Remember, certain versions of the Ring doorbell cameras come with several install plates for free. If yours doesn’t here are some Ring doorbell products from Amazon .com you would be using for a narrow door.
The best Ring doorbell kits for a narrow door are:
1) The Corner Kit. Ensure you are using the door kit that corresponds to your Ring.
2) The Wedge Kit: Again, different kits match different Ring cameras. Ensure you are using the right one for your narrow doorway.
How Do You Install a Ring Doorbell on an Uneven Surface?
It can seem daunting to have a Ring Doorbell installed at your door, especially if it’s an uneven and narrow door frame or wall. Don’t worry, you don’t have to change your door or the door frame, you can still mount the smart doorbell with anchors. As well, there is a Ring Doorbell installation kit that can provide the necessary tools, such as a mount, wedge, and level. This can help if you have a trim that is uneven.
Sometimes looking for a place to mount the door bell too is not always easy, as you have to consider the angle and space. Mounting can become a problem if the view is also compromised, as then you might have to consider a different side that is much more even and could fit the Ring Doorbell.
If you are looking for a side of your house that could work as an option for mounting even if it may be uneven, remember that there are options to having the installation of your Ring Doorbell. Visiting the Ring. com site can provide a solution or video on how to mount your door bell to your door frame.
Can Ring Doorbell Be Installed on the Sidewall?
When it comes to the Ring Doorbell, you can mount it on the sidewall. You are going to need to be able to screw into the posts and ensure that the width works with the Ring Doorbell. One way to check this is to see the existing door frame and if the width works for holes to be drilled for the bracket.
Sometimes the best option when it comes to the Ring Doorbell is to search for the best line of view for your door. Keep the Ring Doorbell at a door that looks as though it needs extra protection. The great thing about a Ring Doorbell is that mounting it requires no wires, which makes it very easy. As long as you can easily access the case from either the left or right, you can install the Ring camera anywhere in or out of your home. Not to mention it is powered with a battery; therefore, all you have to be able to do is make sure you have ample space to access the bell.
Does Ring Doorbell Have to Be Flush?
When it comes to a Ring doorbell, you don’t have to have it flush against a wall. Most homeowners find that when it comes to time to mount a Ring doorbell it is about looking for the best angle to ensure it can work to the best of its abilities. The view is also important to consider for space you plan to mount the Ring.
Final Remarks
Capture every move with a Ring Doorbell outside your narrow door. In case of a breach, you would be able to report the break-in and related information using the camera that you install yourself on your outdoor wall. Subscribe and store videos for a longer period of time; however, if you don’t want to pay, you can still subscribe for free on the Ring website. With a Ring Doorbell, you can have a smart home using a camera and weekly report to share the activity at the front of your door.
For the latest when it comes to the Ring Doorbell or anything related to the Ring, visit the website for related information. Join the many satisfied homeowners by using a Ring doorbell video. Experience security on a whole new level when you install your own top of the line video camera on your outdoor wall or door frame. Whether your door frame is wide or narrow, your next doorbell purchase could be your last. Visit Amazon. com for the Ring doorbell that would work best for you and looks the best at your front door.
